Epson EMP-7850 Manual de instrucciones - Página 36

Navegue en línea o descargue pdf Manual de instrucciones para Proyector Epson EMP-7850. Epson EMP-7850 41 páginas. Esc/vp21 command user's guide for business projectors
También para Epson EMP-7850: Manual de consulta rápida (20 páginas), Manual del usuario (25 páginas), Manual del usuario (25 páginas), Folleto y especificaciones (4 páginas), Manual del usuario (28 páginas), Manual del usuario (28 páginas)

Imprimir página
Epson EMP-7850 Manual de instrucciones
Setting, Monitoring and Controlling from a Computer
7
Register all the selected projectors, and then click the
"Close" button.
To deselect a projector registered for monitoring, select that
projector, and delete it by clicking the "Delete" button.
TIP
g
If the
IP addresses
for projectors that have been registered using the
manual registration function have changed, you can select the Projector
name and then click "Edit" to change the IP address. "Edit" cannot be used
for projectors that have been registered using the Auto detect function.
8
The status of each of the respective registered
projectors is displayed.
Once registered, the status of a registered projector will be displayed
automatically at subsequent startups of the EMP Monitor.
The display content is as shown in the following table.
Status: The projector status is displayed as the following icons:
Power on, no error
Power on, error
Power off, no error
Power off, error
Network Error (The projector is not connected to the network, the
power cable is not plugged in, or another error has occurred.)
Name : This displays the projector names.
Video Source : This displays the selected video source.
Computer
BNC
S-Video
Video
g
DVI
EasyMP
Error data : If an error is detected for a projector, the status will be
displayed as one of the following icons.
Lamp replacement
notification
EasyMP Operation Guide
Replace the lamp. s
"Replacing the
Lamp"
in the User's Guide
35