Cisco 2800 Series Ficha de datos - Página 4

Navegue en línea o descargue pdf Ficha de datos para Enrutador de red Cisco 2800 Series. Cisco 2800 Series 8 páginas. Cisco ios software configuration
También para Cisco 2800 Series: Manual de inicio rápido (13 páginas), Manual de inicio rápido (47 páginas), Nota de aplicación (41 páginas), Manual de inicio rápido (45 páginas), Configuración (10 páginas), Visión general (27 páginas), Ficha de datos (5 páginas), Ficha de datos (20 páginas), Configuración de (32 páginas)

Cisco 2800 Series Ficha de datos
Feature
Alarm Detection
Relevant Management Information
Base (MIB) Support
Remote Management
Signaling Debugging

HARDWARE SPECIFICATIONS

Table 4 shows the hardware specifications for the Cisco E1/T1 ISDN PRI Network Module.
Table 4.
Hardware Specifications for the Cisco E1/T1 ISDN PRI Network Module
Feature
Dimensions (H x W x D)
Operating Temperature
Nonoperating Temperature
Relative Humidity
LEDs
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Description
Controller local loopback
Controller remote loopback
CSU loopback modes for T1 CSU
Data terminal equipment (DTE) loopback
Network loopback
Payload loopback
V.54
Yellow Alarm—Receive/Send from/to network
Blue Alarm—Receive alarm indication signal (AIS) from network
Red Alarm—Loss of network signal
RFC1406-MIB
CISCO-ICSUDSU-MIB
Supported by Cisco WAN Access Performance Management System (WAPMS)
Cisco Intelligence Engine (IE2100)
CiscoWorks
CAS debugs
ISDN Q.921 and Q.931 decode
All other previously existing applicable Cisco IOS debugs
Description
1.55 x 7.10 x 7.2 inches
3.9 x 18.0 x 18.3 centimeters
32 to 104° F (0 to 40° C)
–40 to 185° F (–40 to 85° C)
5-95% non-condensing
LEDs per port
T1: T1 mode selected
E1-BAL: E1 balanced mode selected
E1-UNBAL: E1 unbalanced mode selected
CD: Carrier detect
LP: Loop condition present
RA: Remote alarm detected
LA: Local alarm detected
© 2005 Cisco Systems, Inc. All rights reserved.
Page 4 of 8