Cisco 3745 Manual de inicio rápido - Página 9

Navegue en línea o descargue pdf Manual de inicio rápido para Enrutador de red Cisco 3745. Cisco 3745 33 páginas. Non-proprietary security policy
También para Cisco 3745: Resumen de la solución (16 páginas), Instrucciones de actualización (30 páginas), Manual del usuario (48 páginas), Manual de instalación (12 páginas)

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only

through the use of a special tool, lock and key, or other means of security. Statement 1017

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and

watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld

the metal object to the terminals. Statement 43

Warning

This equipment has been designed for connection to TN and IT power systems. Statement 1007

Warning

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage

(TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports

both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Warning

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of

a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if

you are uncertain that suitable grounding is available. Statement 1024

Warning

Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages

and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other

equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards,

faceplates, front covers, and rear covers are in place. Statement 1029

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

Warning

To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles on

modules (such as power supplies, fans, or cards); these types of handles are not designed to support the weight

of the unit. Statement 1032

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040