Epson EX9230 Configuración rápida
Navegue en línea o descargue pdf Configuración rápida para Proyector Epson EX9230. Epson EX9230 4 páginas.
Imprimir página
EX9230/Pro EX9240
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: These illustrations show the Pro EX9240, but the instructions are the
same for the EX9230 unless otherwise noted.
Contents
Make sure your projector box includes all of these parts (wireless LAN module
cover not included with Pro EX9240):
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
Computer
HDMI 1
HDMI 2
Video
L
R
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to the projector's Computer port and the
other end to your laptop or computer's
your laptop to external display (see "Troubleshooting" on the back of this
sheet). You can also connect an audio cable.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista
or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson
®
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
Computer
HDMI 1
HDMI 2
L
R
Video
USB cable
HDMI cable
VGA cable
Audio cable
monitor port. Make sure to switch
USB Display software (EMP_UDSE.EXE; only
HDMI cable
RCA audio cable
RCA video cable
(composite video)
USB device
Connect a supported digital camera, USB flash drive, or USB storage device to
the projector's USB-A (flat) port.
Computer
HDMI 1
HDMI 2
Video
L
R
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. See the online User's Guide for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the
5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
language and press
. Press the Menu button to exit the menu system.
USB cable
power light on the projector turns blue.
power button twice.
to select it.
. Select Language and press
. Select your