Epson LS500WATV Configuración rápida

Navegue en línea o descargue pdf Configuración rápida para Proyector Epson LS500WATV. Epson LS500WATV 4 páginas.

LS500WATV/LS500BATV

Quick Setup

IMPORTANT: Before using this product, make sure you read these instructions

and the safety instructions in the online User's Guide.

Contents

Make sure your projector box includes all of these parts:

Connect the projector

Streaming device

Connect the included Android TV streaming device to your projector. To stream

content, make sure you have an active streaming account and enter your login

information as necessary for each app.

Note: To connect other streaming devices, see the online User's Guide for more

information. The projector's HDMI ports do not support MHL

Remove the front cover of the projector.

Remove the storage space cover.

Connect the HDMI extension cable to the HDMI3 port and the USB power

cable to the DC Out (2.0A) port.

Connect the HDMI and USB cables to the streaming device and fit the

device securely inside the projector by arranging the cables as shown.

Caution: Do not force the device into the projector; you may damage the

projector and/or the device.

Replace the storage space cover.

Note: Make sure to clear the cables, or the cover will not close.

Replace the front cover of the projector.

Note: To connect external speakers to your projector, see the online User's

Guide.

External video source

You can connect an external video source with an HDMI cable (not included).

Caution: Do not turn on the video source before connecting it to the projector;

you may damage the projector.

Note: Some external video sources may require an optional HDMI adapter

cable.

Connect an HDMI cable to your video source's HDMI output port.

Connect the other end of the HDMI cable to one of the projector's HDMI

ports.

Note: If you are connecting an external audio/video receiver to the

projector, use the projector's HDMI2 (ARC) port. See the online User's

Guide for more information.

Turn on the projector

Plug in the projector.

Remove the lens cap.

Press the

control. The

power button on the projector or the projector remote

power light flashes blue, then stays on.