Epson MovieMate 50 Manual rápido - Página 15

Navegue en línea o descargue pdf Manual rápido para Proyector Epson MovieMate 50. Epson MovieMate 50 24 páginas. Epson moviemate 50: quick start
También para Epson MovieMate 50: Especificaciones (2 páginas), Lista de piezas (1 páginas)

Imprimir página

The picture is wider at the top or bottom.

You've tilted MovieMate to raise or lower the image, causing it to become

"keystoned." Use the

to correct the problem. If you are unable to correct the distortion, you may need

to reduce the degree of tilt.

The picture is taller on the left or right side.

MovieMate is set at an angle to the screen. Face it squarely toward the screen.

The remote control doesn't work.

■

Make sure the toggle switch is in the correct position: set to

numeric buttons, or to

■

Make sure you're within 19 feet of MovieMate, and within range of its front

or back sensor (approximately 30° left or right, and 15° above or below).

■

You may need to replace the remote control's batteries. Make sure they're

inserted with the positive (+) and negative (–) ends positioned as shown in the

battery compartment.

■

Some DVDs don't support all of the remote control's functions.

■

If you're using a "universal" remote control, it might not work with

MovieMate. Epson does not support any third-party remote controls.

buttons on the control panel or remote control

to use the other functions of these buttons.

Func.-

to use the

-123

Solving Problems