ACDelco I-7005T Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Cargador de batería ACDelco I-7005T. ACDelco I-7005T 15 páginas. Fully automatic microprocessor controlled battery charger for 12-volt lead acid batteries
Imprimir página
SAVE THESE INSTRUCTIONS. For your
safety, read, understand, and follow the
information provided with and on this battery
charger. The owner and operator of this
equipment shall have an understanding of
this product and safe operating procedures
before attempting to use. The owner and
operator shall be aware that use and repair
of this product may require special skills
and knowledge. Instructions and safety
information shall be conveyed in the operator's
native language before use of this product is
authorized. If any doubt exists as to the safe
and proper use of this battery charger, remove
from service immediately.
INSPECT BEFORE EACH USE. Do not use
if broken, bent, cracked, melted or otherwise
damaged parts (including labels) are noted.
Any battery charger that appears damaged
in any way, operates abnormally or is
missing parts, shall be removed from service
immediately. If the battery charger has been
or suspected to have been dropped, subjected
to rain or snow, or immersed in liquid, !STOP!
and immediately discontinue use until battery
charger has been checked by a factory
authorized service center. It is recommended
that an annual inspection be done by qualified
personnel. Labels and Owner's Manuals are
available from manufacturer.
Cord Storage (back panel)
SAVE THESE INSTRUCTIONS
Display
& LED
Indicators
Battery Charger Nomenclature
(see pg. 9 for control panel detail)
PRODUCT DESCRIPTION
Automatic battery charger is designed to
charge 12 Volt, rechargeable lead acid
batteries with rated Amp Hour (Ah) capacity
of no less than 16Ah. The application can
be applied on conventional automotive,
maintenance free, marine deep cycle and
AGM, Gel cell batteries such as those used
in cars, trucks, farm equipment, boats, lawn
mowers, tractors, airplanes, motorcycles,
vans, RVs and SUVs, personal watercraft,
snowmobiles, ATVs, trolling motors, etc.
It is designed to be indoor use and for
occasional outdoor use. NEVER expose this
device to rain, snow, fog, or high humidity.
This charger is equipped with 5 charge rate
settings: 2, 10, 20, 30, and 40A.
It is microprocessor controlled to provide
ease of use.
Lighted, digital display shows charging
voltage, charging current, % Charge, Error
Codes and Operation Mode. Charge rate
settings of 2,10,20,30,40A, providing pulse for
4 stage charge and a special Maintenance
mode which helps slow down the effects of
plate sulfated.
IMPORTANT SAFETY
Carry Handle
2
Control
Panel