Cisco NC55A2-MOD-SE-H-S Manual - Página 19

Navegue en línea o descargue pdf Manual para Enrutador de red Cisco NC55A2-MOD-SE-H-S. Cisco NC55A2-MOD-SE-H-S 25 páginas. Connect router to the network

Imprimir página

Connect Router to the Network

c) Slide the transceiver out of the socket.

Figure 15: Removing the 40-Gigabit QSFP+ or 100-Gigabit QSFP28 Transceiver Module

Step 4

Place the QSFP+ or QSFP28 transceiver module into an antistatic bag.

Installing and Removing CFP2 Modules

Before you remove or install a CFP2 module, read the installation information in this section.

Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams

or view directly with optical instruments. Statement 1051

Caution

The CFP2 module is a static-sensitive device. Always use an ESD wrist strap or similar individual grounding

device when handling the CFP2 modules or coming into contact with the modules.

Installing a CFP2 Module

To install a CFP2 module, follow these steps:

Step 1

Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.

Step 2

Align the CFP2 module into the transceiver port socket of the line card.

Installing and Removing CFP2 Modules

Connect Router to the Network