Cisco NCS 6008 Manual - Página 8

Navegue en línea o descargue pdf Manual para Enrutador de red Cisco NCS 6008. Cisco NCS 6008 12 páginas. 6000 series network convergence system routers unpacking, moving, and securing guide
También para Cisco NCS 6008: Manual de desembalaje, traslado y sujeción (44 páginas)

Imprimir página

Provision Breakout Interfaces

Note

Telnet supports a maximum of 100 (including both IPv4 and IPv6) sessions.

For a SSH connection, the ncs6k-k9sec package must be installed on the router. For details about package

installation, see

Provision Breakout Interfaces

The NCS 6000 line cards have multi-slice architecture. On a 10X100G line card, each slice has two 100 GE

ports that can be configured to operate at 100 GE or 10X10 GE. Breakout cables are connected to the 10X10GE

interfaces. The 100G ports are mapped to each slice as:

Ports

0 and 1

2 and 3

4 and 5

6 and 7

8 and 9

SUMMARY STEPS

1. configure

2. hw-module location rack/slot/CPU slice slice_number breakout 10G

3. commit

DETAILED STEPS

Step 1

configure

Step 2

hw-module location rack/slot/CPU slice slice_number breakout 10G

Example:

RP/0/RP0/CPU0:router(config)#hw-module location 0/1/CPU0 slice 1 breakout 10G

Provisions the interfaces on the specified slice in the 10G breakout mode.

Step 3

commit

What to do next

Run the show ipv4 interface brief command in the XR EXEC mode to view breakout interfaces. Each 10

GE interface is represented as

TenGigE<rack_num>/<slot_id>/<card_instance>/<port_num>/<breakout_num>.

Bring-up the Cisco NCS 6008 Router

Install

Packages.

Bring-up the Cisco NCS 6008 Router

Slice