CAB 4214R-300 Manual de instrucciones de montaje - Página 6
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Equipamiento industrial CAB 4214R-300. CAB 4214R-300 14 páginas. Stroke-turn applicator
Imprimir página
2
Product Description
6
2.1
Important Features
•
The supporting air, the vacuum as well as the speed of the cylinder are adjustable. That way the applicator can be
adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels, tamps are cleaned by an air pressure pulses after each
application.
•
For operation within a system the I/O interface of the printer can be used.
2.2
Technical Data
Label transfer method
Label width
in mm for
Label height
in mm for
Compressed air pressure
Sound pressure level
Product during
labeling
Labeling onto the
product
Product height
Horizontal swing angle 90°, 180°, 0°
Product distance to lower edge
at cylinder stroke
Immersion depth pad F
Cycle time about frequency/min.
Table 1
Technical Data
1)
Determined at 100 mm stroke below device / smallest label height / print speed 100 mm/s.
Immersion depth at applicator >25 mm, the cover of the HERMES Q / Hermes + must be modified.
2)
HERMES Q2 / Hermes + 2
HERMES Q4 / Hermes + 4
HERMES Q2 / Hermes + 2
HERMES Q4 / Hermes + 4
fixed
in motion
from the top
from below
sideways
fixed
variable
200 mm up to mm
300 mm up to mm
400 mm up to mm
2)
up to mm
1)
Tamp pad
Tamp pad
with foam
4214 L/R 11 F
4214 L/R 12 F
4 - 58
10 - 58
10 - 80
10 - 80
4 - 40
4 - 40
8 - 40
8 - 40
0,45 MPa (4,5 bar)
unter 74 dB(A)
¢
¢
-
-
¢
¢
¢
¢
¢
¢
-
-
¢
¢
¢
¢
135
135
235
235
335
335
65
65
25
25
Tamp pad
Blow pad
with label stop
4214 L/R 61 F
4214 L/R 2100
10 - 58
10 - 58
10 - 80
10 - 80
4 - 40
10 - 40
8 - 40
10 - 40
¢
¢
¢
-
¢
¢
¢
¢
¢
¢
¢
-
¢
-
¢
¢
135
140
235
240
335
340
65
-
25
25
6