Cisco RV0 Series Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Enrutador de red Cisco RV0 Series. Cisco RV0 Series 13 páginas. Rv0 series routers - dual wan vpn router, gigabit dual wan vpn router, multi-wan vpn router

Imprimir página
For safety, ensure that the heat dissipation holes are facing
W
ARNING
sideways.
Drill two pilot holes into the surface.
S
1
TEP
•
RV042 and RV042G: 58 mm apart
•
RV082 and RV016: 94 mm apart
Insert a screw into each hole, leaving a gap between the surface
S
2
TEP
and the base of the screw head of 1 to 1.2 mm.
Place the router wall-mount slots over the screws and slide the
S
3
TEP
router down until the screws fit snugly into the wall-mount slots.

Rack Mounting RV082 or RV016

You can mount the RV082 or RV016 in a standard size, 19-inch (about 48
cm) wide rack. The router requires 1 rack unit (RU) of space, which is 1.75
inches (44.45mm) high. Mounting brackets are provided.
Do not overload the power outlet or circuit when installing
C
AUTION
multiple devices in a rack.
Place the router on a hard, flat surface.
S
1
TEP
Attach one of the supplied rack–mount brackets to one side of the
S
2
TEP
router with the supplied screws. Secure the bracket tightly.
Follow the same steps to attach the other bracket to the opposite
S
3
TEP
side.
RV0xx Series Routers Quick Start Guide
7