Cisco SG 300-10P Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Enrutador de red Cisco SG 300-10P. Cisco SG 300-10P 17 páginas. Managed switches
También para Cisco SG 300-10P: Manual de inicio rápido (17 páginas), Ficha de datos (14 páginas), Especificaciones (2 páginas), Manual de configuración rápida (10 páginas), Manual de inicio rápido (18 páginas), Manual de inicio rápido (17 páginas)

For stability, load the rack from the bottom to the top, with the

AUTION

heaviest devices on the bottom. A top-heavy rack is likely to

be unstable and may tip over.

Wall Mounting

Only the 8-port models of the switch can be wall-mounted.

The switch should be mounted so that the ports face up or down.

OTE

Do not mount the switch with the ports to the side.

There is a wall-mount kit packed with your switch. The dimensions for the

mount kit are as follows:

1 8 mm/0.4 in

Mount the managed switch to the wall by drilling two pilot holes

3.7 inches (95 mm) apart, attaching the provided anchors and screws to

the wall, then sliding the switch into position on the screws.

The switch should have a minimum of 5 inches (130 mm) of clearance on all

sides.

Insecure mounting may damage the device or cause injury.

ARNING

Cisco is not responsible for damages incurred by insecure wall-

mounting.

2 22.2 mm/0.9 in 3 6.8 mm/0.3 in 4 17.6 mm/0.7 in

300 Series Managed Switches