CAB ER4/210 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Accesorios para impresoras CAB ER4/210. CAB ER4/210 14 páginas. External rewinder
También para CAB ER4/210: Manual del usuario (14 páginas)

Imprimir página

Settings

4.1

Setting the Winding Direction

With the setting of the winding direction it is possible to rewind the labels inside or outside.

Attention!

Risk of gear defect!

 Switch off the device before changing the winding direction.

ER4/210

Figure 4

Setting the winding direction

 Select the winding direction with the switch (1):

Rewinding with labels inside

Rewinding with labels outside

4.2

Adjusting the Guide Axle

Depending on the used printer the guide axle should be adjusted so that the label strip is led horizontally from the

printer to the rewinder.

Figure 5

Adjusting the guide axle

ERx/300

ER4/210

1. Loosen the guide axle (1) by turning it

counterclockwise.

2. Move the axle in the guide plate (2) to the

desired position.

3. Fasten the guide axle (1) by turning it clockwise.

ERx/300