Cisco uBR925 Manual de inicio rápido - Página 10

Navegue en línea o descargue pdf Manual de inicio rápido para Enrutador de red Cisco uBR925. Cisco uBR925 36 páginas. Cable access router

Figure 3

USB Cable Types

Host (Type 'A') Connector

Note The USB port on the Cisco uBR925 Cable Access Router is between the Voice Port and

Console Port connectors, and it is labeled with the USB icon shown in Figure 4:

Figure 4

USB Icon

Step 4

Verify that the USB LED on the front panel of the Cisco uBR925 Cable Access Router turns

on. If this LED does not come on, check that each connector on the USB cable is fully inserted

into the USB port on the computer (or USB hub) and the USB port on the Cisco uBR925 Cable

Access Router. If you are using a USB hub, verify that it is properly connected to the computer.

Step 5

The Windows software detects the installation of a new USB device and automatically begins

the software installation process. Proceed to the next section, "Installing the USB Driver for

a Windows PC" for instructions on installing the USB software driver.

Device (Type 'B') Connector