Cisco Unified Communications Manager 8.5(1) Manual de inicio rápido - Página 11
Navegue en línea o descargue pdf Manual de inicio rápido para Enrutador de red Cisco Unified Communications Manager 8.5(1). Cisco Unified Communications Manager 8.5(1) 20 páginas. 850 series and 870 series access routers cabling and setup
También para Cisco Unified Communications Manager 8.5(1): Ficha de datos (8 páginas)
Imprimir página
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Typical Installations of the Cisco 850 Series and
Cisco 870 Series Routers
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
Typical installations of the Cisco 850 series and Cisco 870 series routers are
depicted in
Figure 1-6
Cisco 851 and Cisco 871 router—See
•
Cisco 857 and Cisco 87 router—See
•
Cisco 876 router—See
•
Cisco 878 router—See
•
Figure 1-6
shows a typical installation of a Cisco 851 or Cisco 871 router. This
figure shows the back panel of a Cisco 871 router, which has two Universal Serial
Bus (USB) ports. The Cisco 851 router does not have any USB ports; however,
the connections on the other ports are the same for both the Cisco 851 and the
Cisco 871 routers.
through
Figure
1-9, as follows:
Figure
Figure
Figure
1-8.
Figure
1-9.
1-6.
1-7.
1-11