Cisco WS-X3011 Nota de configuración - Página 15

Navegue en línea o descargue pdf Nota de configuración para Enrutador de red Cisco WS-X3011. Cisco WS-X3011 46 páginas.

The synchronous serial port supports the following signaling standards:

Note

EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530.

Figure 9

Connecting a CSU/DSU or Other DCE Device

BRI 0

ETH 0

SERIAL 0

SERIAL 1

FLEX SLOT

DIAG

BRI 0

SUPERV ISIOR ENGINE

Synchronous serial

port (DB-60)

Serial transition

cable

EIA/TIA-232, EIA/TIA-449, V.35,

X.21, or EIA-530 connector

Connect the ISDN BRI port (RJ-45) to an NT1 device. (See Figure 10.)

Step 2

After you have installed the router card, connect the power cable to the switch and the

Step 3

power source and then power it ON. (If the switch does not power ON, refer to the

appropriate manual for the switch.)

SERIAL 1

AUX

WS-X3011

CSU/DSU or

other DCE

Router Card (WS-X3011) Configuration Note

Connecting to a Network

Switch