Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector Manual del usuario - Página 29
Navegue en línea o descargue pdf Manual del usuario para Proyector Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector. Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector 44 páginas. Epson powerlite home 10: quick setup
También para Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector: Manual del usuario (13 páginas), Especificaciones (2 páginas), Manual de configuración rápida (7 páginas)
Imprimir página
4. Use a small screwdriver to loosen the two silver screws holding the lamp in place. (You
can't remove these screws.)
5. Grasp the lamp as shown and pull it straight out.
6. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp assembly. Touching the glass could
result in premature lamp failure.
7. To replace the lamp cover, insert the tabs and then snap the cover into place. (The
projector won't work if the lamp cover is loose.)
After replacing the lamp, you need to reset the lamp timer, as described in the next section.
29