Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Manual de inicio rápido - Página 38
Navegue en línea o descargue pdf Manual de inicio rápido para Punto de acceso inalámbrico Cisco AIR-AP1020 - 1000 Series Lightweight Access Point. Cisco AIR-AP1020 - 1000 Series Lightweight Access Point 44 páginas. Aironet 1000 series ieee 802.11a/b/g lightweight access points with external antennas
Imprimir página•
Generally, the 5150-5350 MHz, 5470-5750 MHz, and 2400-2483.5 MHz bands are allowed in most EU
countries. However, there are several country specific restrictions that apply to different bands on a
country-by-country basis.
The following entries specify countries with specific restrictions:
Note
These restrictions may evolve. It is recommended that you check with their local authorities for latest
requirements
•
•
•
•
•
•
•
Industry Canada Required User Information for Cisco Aironet 1000 Series
Lightweight Access Points
Industry Canada Required User Information for Cisco Aironet 1000 Series Lightweight Access Points
This device has been designed to operate with antennae having maximum gains of 7.8 dBi (2.4 GHz) and
7.4 dBi (5 GHz).
Antennae having higher gains is strictly prohibited per regulations of Industry Canada. The required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
Safety Considerations
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
Warning
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
Safety Considerations
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
A-6
The Cisco Aironet 1000 Series IEEE 802.11a/b/g lightweight access point meets EU DFS
requirement.
Austria - Only transmission within the frequency band 5150-5250 MHz is allowed. The band
5470-5750 MHz is not allowed.
Belgium - The frequency band 5470-5750 MHz is not allowed.
France - The frequency band 5470-5750 MHz is not allowed.
Portugal - Integral antenna is required.
Switzerland - The frequency band 5470-5750 MHz is not allowed.
Czech - The frequency band 5470-5750 MHz is not allowed.
Slovak Republic - The frequency band 5470-5750 MHz is not allowed.
Appendix A
Planning Notes
78-17147-01