Cisco AIR-CAP1552SA-x-K9 Manual de instalación - Página 18
Navegue en línea o descargue pdf Manual de instalación para Punto de acceso inalámbrico Cisco AIR-CAP1552SA-x-K9. Cisco AIR-CAP1552SA-x-K9 24 páginas. Cisco aironet 1550 series for hazardous locations
Imprimir página
:: Seite 18 von 24 :: Datenblatt zum Produkt Cisco Cisco Aironet for hazardous locations - mit DC# 790021 ::
Hardware Features
Point-to-Point Bridging
Point-to-Multipoint Bridging
Cisco Aironet 1550 Series for Hazardous Locations Installation Guide
1-18
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=790021
The access points can be used to extend a remote network by using the 5 GHz backhaul radio to bridge
the two network segments as shown in
bridging on the controller for each access point. By default this capability is turned-off for all access
points.
Wireless client access is supported; however, if bridging between tall buildings, the 2.4-GHz wireless
coverage area may be limited and possibly not suitable for direct wireless client access.
Figure 1-12
Access Point Point-to-Point Bridging Example
The access points can be used as a RAP to connect multiple remote MAPs with their associated wired
networks. By default this capability is turned-off for all access points. To support Ethernet bridging, you
must enable bridging on the controller for each access point. Wireless client access can be provided over
the bridging link; however, if bridging between tall buildings, the 2.4-GHz wireless coverage area may
be limited and possibly not suitable for direct wireless client access.
of access point-to-multipoint bridging.
Figure 1-13
Access Point to Multipoint Bridging Example
Figure
1-12. To support Ethernet bridging, you must enable
(5 GHz)
(5 GHz)
(5 GHz)
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
Chapter 1
Overview
Figure 1-13
illustrates an example