Cisco AIR-LAP1310G Instrucciones de montaje - Página 14

Navegue en línea o descargue pdf Instrucciones de montaje para Punto de acceso inalámbrico Cisco AIR-LAP1310G. Cisco AIR-LAP1310G 40 páginas. Cisco aironet 1300 series lightweight outdoor access point

Imprimir página

1. Mounting the Access Point

Mounting the Access Point

Mount the access point using the following user-provided hardware:

Step 4

•

Note

Tighten the bolts to secure the access point mounting bracket to the wall or ceiling.

Step 5

Mounting the Power Injector on the Access Point

When using the wall or ceiling mounting bracket, you can mount the power injector directly on the

access point mounting lugs (see

When mounted together, the access point and power injector must be mounted in a sheltered indoor

Note

environment.

Figure 3

The following hardware used to mount the power injector on the access point is supplied with the wall

or ceiling mounting bracket kit:

•

Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions

Wooden structure—three 1/4 x 1 inch (minimum) lag bolts

Hollow walls—three 1/4-20 x 2 3/4 molly anchors

Concrete structure—three 1/4 x 1 inch (minimum) bolts with concrete anchors

Examine the structure to ensure that the mounting location is not deteriorating or weak. You are

responsible for ensuring that the mounting location can adequately support the access point.

Mounting the Power Injector on the Access Point

Four hex head bolts with serrated flange (M6x1x10 mm)

Four washers

Figure

3) using the hardware included with the bracket.

78-17634-01