Cisco Aironet 1520 Series Manual de instalación del hardware - Página 50
Navegue en línea o descargue pdf Manual de instalación del hardware para Punto de acceso inalámbrico Cisco Aironet 1520 Series. Cisco Aironet 1520 Series 50 páginas. Outdoor mesh access point
También para Cisco Aironet 1520 Series: Manual de introducción (37 páginas), Manual (27 páginas)
Imprimir página
Mounting the Access Point
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Position the two bolts on the access point into the quick mount notches on each side of the mounting
Step 4
bracket (see
Figure 2-8
Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
Step 5
point.
Ensure that the front of the access point is vertical, and tighten the four bolts to 13 to 15 ft lbs
Step 6
(17.6 to 20.3 Nm).
(Optional) When using the optional Cisco external omnidirectional antennas, connect them to the access
Step 7
point as shown in
Note
Continue with the
Step 8
Point" section on page
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
2-20
Figure
2-8). Ensure that the hinged door is facing out.
Access Point Hanging in Mounting Bracket
Figure
2-2. Hand-tighten the antennas to the access point.
Some access point configurations might support two or three of the 2.4-GHz antennas.
"Grounding the Access Point" section on page 2-46
2-50.
Chapter 2
Mounting Instructions
and the
"Powering the Access
OL-12632-03