ACU-RITE 02001 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Estación meteorológica ACU-RITE 02001. ACU-RITE 02001 8 páginas. Wireless weather station forecaster
También para ACU-RITE 02001: Manual de instrucciones (8 páginas)
Imprimir página
"
Troubleshooting
Problem
Bad Temperature
Reception
T
Ill
no bars
Bad Atomic Clock
Reception
T
Ill
no bars
No Outdoor
Temperature or
Humidity Display
(no communication]
Main Unit
Display Not Working
ACU ►
RITE.
DESIGNED TO WORK FOR
YOU"
Possible Solution
Relocate the main unit and/or the wireless
sensor. Both units must be within 100 feet
from each
other.
Make sure both units are
placed at least 3 feet from other electronic
appliances and devices that may interfere
with the wireless communication [such as
TVs, microwaves, computers etc].
NOTE:
It
may take up to 20 minutes for the main unit
to resynchronize with the sensor when
batteries are replaced.
Relocate the main unit. Make sure the main
unit is placed at least 3 feet from other
electronic appliances and devices that may
interfere with the wireless communication
[such as TVs, microwaves, computers etc].
Large metallic surfaces will also interfere
with the atomic clock signal. Make sure the
back side of the main unit is facing Colorado.
If wireless reception is bad [no bars]. see
"Bad
Reception·· section above. The wireless
ID setting on each unit must match for both
units to communicate
properly.
See "Set
Wireless 10·· on the next page.
Make certain that the batteries are installed
correctly.
The batteries may need replacing.
Product Registration
To receive product information, register
your product online
.
It's quick and easy!
Log on to http://www.chaneyinstrument.com/product_reg.htm
-
6
-
Set Wireless ID
This wireless thermometer
uses long range 433mhz
radio frequency for
communication
.
In the event that you have
reception problems due to
interference, both the main
unit and the wireless sensor
have a selectable wireless
ID
.
The ID switches are
located within the battery
compartments of the main
unit and the wireless
sensor.
You may choose A, B or C;
but both the main units and
the wireless sensors IDs
must match for successful
synchronization
.
(
5 • PRODUCT SPECIFICATIONS
Measurement Ranges
Temperature
Main
Unit:
32°F to 122°F / o°C to 50°C
Wireless Sensor: -40°F to 158°F / -40°C to 70°C
Specifications
Power Requirements
Main
Unit:
3
x
" AA"
alkaline or lithium batteries
Both wireless ID's
must match
)
Wireless Sensor: 2 x
""AA"
alkaline or lithium batteries
Wireless Communication
Radio Frequency: 433 mhz
Transmission Intervals
:
every 16 seconds
Atomic Clock
Frequency:
WWVB 6oKhz
Synchronizes Daily
- 7 -