Epson Artisan 800 - All-in-One Printer Manual de instalación en red - Página 33

Navegue en línea o descargue pdf Manual de instalación en red para Impresora todo en uno Epson Artisan 800 - All-in-One Printer. Epson Artisan 800 - All-in-One Printer 41 páginas. Artisan 700/800 series
También para Epson Artisan 800 - All-in-One Printer: Manual del usuario (34 páginas), Manual del usuario (38 páginas), Sustitución de cartuchos (2 páginas), Especificaciones (2 páginas), Manual de inicio rápido (8 páginas), Boletín de asistencia sobre productos (5 páginas), Manual de instalación en red (29 páginas), Información de configuración (3 páginas), Faq (4 páginas)

Imprimir página

Epson Artisan 800 - All-in-One Printer Manual de instalación en red

■

Make sure there aren't any access restrictions (such as MAC address filtering)

set on the wireless router or access point. If access restrictions are set, register

the printer's MAC address on the router or access point. Print a Network

Status Sheet (see page 36) to obtain the MAC address. Then see your router or

access point's documentation for instructions.

■

Check to see if your wireless router or access point is set to not broadcast its

network name (SSID). If so, you will need to enter the SSID manually in the

printer's setup software. If your wireless router or access point has wireless

security enabled, you will also need to know what kind of security it is using.

■

Make sure that you entered the correct WEP key or passphrase for your

wireless network. WEP keys are either ASCII or hexadecimal. If your

passphrase contains upper- or lowercase letters, be sure to enter them

correctly.

■

If you see the message "The combination of IP address and subnet mask is

invalid", try the following solutions:

■

If your router or access point is set to assign IP addresses using DHCP, try

setting the printer's IP address setting to

wireless installations or page 21 for wired installations.)

■

If you want to manually configure the printer's IP address, click

when you see the Current IP Address Status screen and enter the IP

address and subnet mask.

■

Make sure your computer is connected to your wireless router or access

point. See your router or access point's documentation for details.

■

Set a unique IP address for your printer. All IP addresses are written in

segments of four numerical values. The last segment must be set to a

unique numerical value (between 1 and 254). When the router is set to

assign IP addresses using DHCP, set the printer's IP address to a value that

doesn't conflict with the IP address range assigned by the DHCP server.

For example:

IP address of your router or access point: 192.168.1.1

IP address of your printer: 192.168.1.3

For the subnet mask, 255.255.255.0 is normally used for small-scale

networks (all devices on your network should use the same subnet mask).

Also, when a gateway value is set, use the same value as the IP address for

your wireless router or access point.

. (See page 11 for

Auto(DHCP)

Troubleshooting

Change