Cisco Cisco Aironet Wireless LAN Client Manual de inicio rápido - Página 10
Navegue en línea o descargue pdf Manual de inicio rápido para Punto de acceso inalámbrico Cisco Cisco Aironet Wireless LAN Client. Cisco Cisco Aironet Wireless LAN Client 12 páginas.
También para Cisco Cisco Aironet Wireless LAN Client: Manual de introducción (38 páginas)
Imprimir página
Safety Information for the Cisco Aironet Access Point
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC certified equipment. Cisco Aironet wireless
LAN products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991.
Proper operation of this radio according to the instructions found in this manual and the hardware
installation guide on the Cisco Aironet Access Point and Bridge CD will result in user exposure that is
substantially below the FCC recommended limits.
• Do not touch or move antenna(s) while the unit is transmitting or receiving.
• Do not hold any component containing a radio such that the antenna is very close to or touching
any exposed parts of the body, especially the face or eyes, while transmitting.
• Do not operate a portable transmitter near unshielded blasting caps or in an explosive
environment unless it is a type especially qualified for such use.
• Do not operate the radio or attempt to transmit data unless the antenna is connected; otherwise,
the radio may be damaged.
• Antenna use:
Always orient the antenna so that it is at least 8 in. (20 cm) away from your body.
–
This equipment has been tested and found to comply with the European Telecommunications Standard
ETS 300.328. This standard covers Wideband Data Transmission Systems referred to in CEPT
recommendation T/R 10.01.
This type-accepted equipment is designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
10