ACU-RITE 02027 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Estación meteorológica ACU-RITE 02027. ACU-RITE 02027 16 páginas.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

The indoor / outdoor temperature and humidity readings, and barometric

pressure can be calibrated on the display unit to improve accuracy. Calibration

can improve accuracy when sensor placement or environmental factors impact

the data accuracy.

1. To access calibration mode, press AND HOLD the "

buttons simultaneously for at least 5 seconds.

2. To adjust the currently selected (flashing) item, press and release the "

or "

" buttons to calibrate the data value higher or lower from the actual

reading.

3. To save your adjustments, press and release the "

next preference. The " " icon will remain illuminated next to calibrated

values.

The preference set order is as follows:

OUTDOOR TEMPERATURE

OUTDOOR HUMIDITY

INDOOR TEMPERATURE

INDOOR HUMIDITY

BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

*To change from AUTO to MANUAL pressure mode and vice versa, press

AND HOLD the "

the current pressure mode selected,"AUTO" or "MANUAL".

After 20 seconds of inactivity, the display will save the adjustments and exit

calibration mode. Note: Calibrations will be erased if the display is reset or if

batteries are removed and the power adapter is unplugged.

" button for at least 10 seconds. The display indicates

", "

", and "

" button to adjust the