Cisco DPH650 Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Punto de acceso inalámbrico Cisco DPH650. Cisco DPH650 36 páginas.

Configure the DPH650

Wireless WPS

The Wi-Fi Protected Setup(WPS) has aimed to ease the setup of the wireless

security. You may choose to use this method if your client adapter has also

supported WPS.

WPS: Allows wireless clients to be associated securely with the DPH650.

WPS mode: Allows the Personal Information Number (PIN) or Push Button

Configuration (PBC) method to be used to authorize a new client to the DPH650. The

PIN method requires the use to enter a client device PIN, obtained from a client

application web interface. The PBC method requires the user to push buttons on the

DPH650 and client devices within a two-minute period to connect them.

Management

Administrator Settings: Configures the administrator's account with the account

name and password.

NTP Settings

You may select this option to have the DPH650 get the time and date from the

Network Time Protocol (NTP) time server you specified below.

Time Zone: Sets the time zone where the DPH650 resides.

NTP Server: Identifies the IP address of the NTP server.

NTP Synchronization: Sets the number of seconds that the DPH650 should

synchronize with the NTP server.

DDNS Settings

Dynamic DNS Provider: The DDNS provider.

Account: The DDNS account name.

Password: The DDNS Password

DDNS: The DDNS hostname assigned by your DDNS service.

Upload Firmware

You may update your firmware with this function. To apply this firmware, click

Browse and select the firmware that you would like to load. Then click Apply.

Settings Management

Export Settings: Exports settings to be saved on your local disk.

Import Settings: Allows you to import firmware.

Load Factory Defaults: Replaces any settings that you have customized by loading

the device with the default (factory) settings.

4027494 Rev A