Epson C11CA30201 - Artisan 700 Photo All-in-One Printer Manual de instalación en red - Página 32

Navegue en línea o descargue pdf Manual de instalación en red para Impresora todo en uno Epson C11CA30201 - Artisan 700 Photo All-in-One Printer. Epson C11CA30201 - Artisan 700 Photo All-in-One Printer 41 páginas. Using the control panel for wireless network installation
También para Epson C11CA30201 - Artisan 700 Photo All-in-One Printer: Información importante sobre la instalación (3 páginas), Especificaciones (2 páginas), Manual de inicio rápido (8 páginas), Boletín de asistencia sobre productos (5 páginas), Manual de funciones (28 páginas)

11. Click

12. Click

Note:

If the printer's IP address changes, you will need to repeat steps 1 through 12

to reconfigure Epson Scan network settings.

You're ready to scan and print. See your printed documentation and on-screen

Epson Information Center for details.

Troubleshooting

If you have problems setting up or using your product on a network, check these

sections for help:

■

"Setup Problems" below

■

"Printing Problems" on page 34

■

"Scanning Problems" on page 35

This section also explains how to print a Network Status Sheet (see page 36) and

reset network settings (page 37).

Software installation failed

Reset the printer's network settings (see page 37) and perform a first time

installation of the printer software. (See page 3 for wireless installations or page 15

for wired installations.)

Cannot connect to or find the wireless router or access point

■

Try connecting to the wireless router or access point with your computer or

another device to confirm that it is working correctly.

■

Make sure that the printer is within range of your wireless router or access

point.

■

Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or

large metal object such as a filing cabinet.

Troubleshooting

again to close the EPSON Scan Settings window.