Cisco Meraki MR36H Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Punto de acceso inalámbrico Cisco Meraki MR36H. Cisco Meraki MR36H 22 páginas.

31/01/2022, 19:00

Static Assignment

Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the

static IP:

1. Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID broadcast by

the AP) or over a wired connection.

2. If using a wired connection, connect the client machine to the MR36H either through a PoE switch or a PoE

Injector. If using a PoE switch, plug an Ethernet cable into the MR36H's Ethernet jack, and the other end into

a PoE switch. Then connect the client machine over Ethernet cable to the PoE switch. If using a PoE Injector,

connect the MR36H to the "PoE" port of the Injector, and the client machine to the "LAN" port.

3. Using a web browser on the client machine, access the AP's built-in web server by browsing to

http://my.meraki.com. Alternatively, browse to http://10.128.128.128.

4. Click on the "Uplink Conﬁguration" tab. Log in. The default login is the serial number (e.g. Qxxx-xxxx-xxxx),

with no password (e.g., Q2DD-551C-ZYW3).

5. Conﬁgure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on its

wired connection.

6. If necessary, reconnect the AP to the LAN.

Static IP via DHCP Reservations

Instead of associating to each Meraki AP individually to conﬁgure static IP addresses, an administrator can

assign static IP addresses on the upstream DHCP server. Through "DHCP reservations, " IP addresses are

"reserved" for the MAC addresses of the Meraki APs. Please consult the documentation for the DHCP server to

conﬁgure DHCP reservations.

Collect Tools

You will need the following tools to perform an installation:



How can we help you?

You will need the following hardware to perform an installation:

https://documentation.meraki.com/MR/MR_Installation_Guides/MR36H_Installation_Guide

MR36H Installation Guide - Cisco Meraki



10/21