Cisco Meraki MR42 Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Punto de acceso inalámbrico Cisco Meraki MR42. Cisco Meraki MR42 17 páginas.
También para Cisco Meraki MR42: Manual de instalación (2 páginas)

Imprimir página

Power Source Options

The MR42 access point can be powered using either the Meraki AC Adapter, PoE Injector (both sold separately), or a third-party PoE switch.

The MR42 will function in low power mode when powered by a 802.3af power source. While in low power mode, the MR42 will disable its Air Marshal

radio as well as two out of three transmit streams on the 2.4 Ghz band. Despite being in low power mode, the device can still supply full 802.11ac

capabilities.

Factory Reset Button

If the button is pressed and held for at least ﬁve seconds and then released, the MR42 will reboot and be restored to its original factory settings by deleting all

conﬁguration information stored on the unit.

LED Indicators and Run Dark Mode

Your MR42 is equipped with a multi-color LED light on the front of the unit to convey information about system functionality and performance:

• Orange - AP is booting (permanent Orange suggests hardware issue)

• Rainbow - AP is initializing/scanning

• Blinking Blue - AP is upgrading

• Green - AP in Gateway mode with no clients

• Blue - AP in Gateway mode with clients

• Blinking Orange - AP can't find uplink

NOTE: Blinking Green LED indicates that the device is in site survey mode. Please see the Conducting Site Surveys with MR Access Points for more

details.

The MR42 may be operated in "Run Dark" mode for additional security and to reduce the visibility of the access point. In this mode, the LED will not be

illuminated. This mode may be enabled through Meraki dashboard.

Package Contents

The MR42 package contains the following:

• MR42 Cloud-Managed Access Point