Cisco Meraki MR46E Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Punto de acceso inalámbrico Cisco Meraki MR46E. Cisco Meraki MR46E 19 páginas.

Factory Reset Button

If the button is pressed and held for at least ﬁve seconds and then released, the AP will reboot and be restored to its

original factory settings by deleting all configuration information stored on the unit.

Your access point is equipped with a multi-color LED light on the front of the unit to convey information about system

functionality and performance:

• Orange - AP is booting (permanent Orange suggests hardware issue)

• Rainbow - AP is initializing/scanning

• Blinking Blue - AP is upgrading

• Green - AP in Gateway mode with no clients

• Blue - AP in Gateway mode with clients

• Blinking Orange - AP can't find uplink

NOTE: Blinking Green LED indicates that the device is in site survey mode. Please see the Conducting Site Surveys

with MR Access Points for more details.

The MR46E access point may be operated in "Run Dark" mode for additional security and to reduce the visibility of the

access point. In this mode, the LED will not be illuminated. This mode may be enabled through Meraki Dashboard.

The access point packages contain the following:

MR46E Cloud-Managed Access Point

Mount cradle including built-in level tool