Cisco MERAKI MR46E-HW Manual de instalación del hardware - Página 8
Navegue en línea o descargue pdf Manual de instalación del hardware para Punto de acceso inalámbrico Cisco MERAKI MR46E-HW. Cisco MERAKI MR46E-HW 28 páginas.
Imprimir página
2.3 Security Features
The MR46E-HW features multiple options for physically securing the access point after installation:
Security screw – The accessory kit includes screws that can be used to secure the access point to
1.
the mount plate. Engaging the security screw prevents accidental dislodging and theft.
Kensington lock – The access point contains a hard point that allows it to be secured to any nearby
2.
permanent structure using a standard Kensington lock.
2.4 Ethernet Ports
The MR46E-HW features an Ethernet RJ45 port that accepts 802.3at power (labeled "PoE"). This port
should be used for uplink to your WAN connection.
2.5 Power Source Options
The MR46E-HW access point can be powered using either the Meraki AC Adapter or 802.3at PoE Injector
(both sold separately) or a third-party 802.3at PoE switch.
2.6 Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the MR46E-HW will reboot
and be restored to its original factory settings by deleting all configuration information stored on the unit.
7