Cisco WAP300N Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Punto de acceso inalámbrico Cisco WAP300N. Cisco WAP300N 30 páginas.
También para Cisco WAP300N: Manual (9 páginas)

Imprimir página

Linksys WAP300N

How to install your WAP300N

The easiest way to install your WAP300N is to use the included Setup CD

NOTE

The Setup CD can only help you set up the WAP300N in Access

Point mode For more information and examples of other modes,

see the diagrams on pages 4 to 7

To install your WAP300N:

1. Insert the CD into your CD or DVD drive Make sure that the computer is

already connected to your home network

2. Click Set up your wireless access point

If you do not see this:

For Windows, find and click Computer, then double-click the CD drive

and the Setup icon

For Mac, double-click the CD icon on your desktop, then double-click the

Setup icon

3. Follow the on-screen instructions

How to open the browser-based utility

For advanced configuration of the WAP300N, you need to open the browser-

based utility

To open the browser-based utility:

1. Connect the WAP300N to your network For example, use the included

cable to connect your WAP300N to the Ethernet port on your network

router or a networked computer

2. Open a web browser on a computer connected to your network, then

enter the IP address of your WAP300N You are prompted for a user name

and password

TIPS

• If the WAP300N is connected to a network with a DHCP server

(usually the network router), find the device's IP address in

the DHCP client table of your router (refer to your router's

documentation for help) Use that IP address to open the

browser-based utility

• If there is no DHCP server, or if the WAP300N is not wirelessly

connected to any other device and it is connected with an

Ethernet cable directly to a computer, then the WAP300N uses

10.100.1.1 as its IP address until a DHCP server is detected

• If you set a static IP address for the WAP300N through the

browser-based utility, then enter the static IP address instead

3. Leave the User name field blank, then type the password you created

during Setup If you did not create a new password, use the default

password admin

4. Click OK The main menu opens

Setting Up: Basics