Cisco Wap581 Manual de inicio rápido - Página 8

Navegue en línea o descargue pdf Manual de inicio rápido para Punto de acceso inalámbrico Cisco Wap581. Cisco Wap581 14 páginas. Reboot and reset to factory default settings
También para Cisco Wap581: Manual de inicio rápido (17 páginas), Manual (10 páginas)

Imprimir página

Getting Started with the Configuration

To configure the wireless access points, you can either use Ethernet or

wireless. Please follow these steps to access the Wizard and then the

web-based configuration utility from your computer by Ethernet:

Ethernet: Connect the wireless access point to the same network

TEP

(IP subnet) as your computer. The factory default IP address

configuration of the access points is DHCP. Make sure your DHCP

server is running and can be reached.

See

Incorrect IP Address

do not have a DHCP server.

Wireless: Search the wireless SSID "CiscoSB-Setup", and connect

to this SSID with the passphrase "cisco123".

Locate the IP address of the wireless access point.

TEP

The wireless access points can be accessed and managed by

Cisco network tools and services including the Cisco FindIT

Network Discovery Utility that enables you to automatically

discover all supported Cisco devices in the same local

network segment as your computer. You can get a snapshot

view of each device or launch the product configuration utility

to view and configure the settings. For more information, see

www.cisco.com/go/findit.

b. The wireless access points are Bonjour-enabled and

automatically broadcast their services and listen for services

being advertised by other Bonjour-enabled devices. If you

have a Bonjour-enabled browser, such as Microsoft Internet

Explorer with a Bonjour plug-in, or the Apple Mac Safari

browser, you can find the wireless access point on your local

network without knowing its IP address.

You can download the complete Bonjour for Microsoft Internet

Explorer browser from Apple's website by visiting:

http://www.apple.com/bonjour/

Locate the IP address assigned by your DHCP server by

accessing your router or DHCP server. See your DHCP server

instructions for more information.

Launch a web browser, such as Microsoft Internet Explorer or

TEP

Mozilla Firefox.

In the Address field, enter the default DHCP address and press the

TEP

Enter key.

Cisco WAP581 Wireless Access Point

for troubleshooting information, or if you