CABINETS TO GO Findley & Myers LC3096 Instrucciones de montaje - Página 3
Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior CABINETS TO GO Findley & Myers LC3096. CABINETS TO GO Findley & Myers LC3096 4 páginas. Pantry cabinet
Imprimir página
If the UC or LC you are installing runs the length of your ceiling height, it is
recommended to assemble the unit standing to avoid scraping your ceiling.
Instructions:
►
Put the Back Panel (D) face up on a flat soft working surface to ensure that the surface is not scratched
1.
or damaged (Figure 1).
Installing the Side Panels: Insert the right and left side panels (B) into the grooves of the back panel
2.
(D) and align the cam lock connectors. (Figure 2) Lock the cam lock with a screwdriver by turning the screw 180°
clockwise. (Figure 3)
Installing the Toe Kick (F): Place the toe kick (F) at the end of side panels (B). Align each cam lock on the
3.
toe kick and lock them. (Figure 4)
Install the Top, Bottom, & Center Panels (C) by sliding them in to the grooves.
4.
Install the face frame (A) by placing cam lock side down onto the box of the cabinet. (Figure 6) Align all
5.
grooves and cam locks onto the face frame and coordinating cam locks. It may be necessary to open all
cabinet doors. Lock all face frame cam locks with a screwdriver. (Figure 3)
A
B
Figure 2
F
C
6. Install the shelf clips (b) into the cabinet at the desired heights
for the adjustable shelves. Insert the shelves (E) into the
assembled cabinet. Install the rubber buttons (a) onto the corner
of the doors where they come in contact with the frame.
a
Figure 6
6-12
Qty
b
t
12-16
Q
y
NOTICE
D
Figure 1
B
Figure 4
C
C
B
Figure 5
Page 3
Figure 3