CABINETS TO GO Findley & Myers WC3042 Instrucciones de montaje - Página 3
Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior CABINETS TO GO Findley & Myers WC3042. CABINETS TO GO Findley & Myers WC3042 4 páginas. Wall cabinet
Imprimir página
►
Instructions:
1.
Place the face frame (A) face down on a flat soft working surface to ensure that the face is not
scratched or damaged (Figure 1).
2.
Installing the Side Panels: Insert the right and left side panels (B) into the groove of face frame
(A) and align the cam lock connectors (Figure 2). Lock the cam lock with screwdriver by turning the
screw 180° degrees clockwise (Figure 3).
A
3.
Installing the Top and Bottom: Gently spread side panels and insert top and bottom (C) into
grooves of side panel (B) until they seat in the face frame (A) (Figure 4). Align them and lock each cam
(Figure 3).
4.
Installing the Back Panel: Insert and slide the back panel (D) into the groove in the rear of the side
panel (B) (Figure 5). Align the back panel (D) and enforce it with 1 " Back Panel Screws (c) into the
pre-drilled holes on the back panel.
c
6
Qty
Place the "L" brackets (a) into the corner of the face frame and the side panels at the top and bottom of
5
the cabinet. Then fasten the screws (b) to them as shown in (Figure 6). Install round buttons (f) where the
doors come in contact with the frame. (Figure 7) Use shelf clips (g) where desired and insert shelves (E).
a
b
4
8
Qty
Q ty
B
Figure 2
C
C
Figure 6
A
Figure 1
C
B
Figure 4
D
u
B
Figure 5
f
4
Qty
g
Qty 12
Page 3
Figure 3
d
e
To install the cabinet to
the wall you should
use wall mount screws
(d), and anchors (e) if
t
4
t
4
Q
y
Q
y
installing directly into
drywall.
Figure 7