Digitana VCS3 MKII Quad Midi-CV Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Digitana VCS3 MKII Quad Midi-CV. Digitana VCS3 MKII Quad Midi-CV 13 páginas.
Imprimir páginaclick to send sysex message
directly to the Quad Midi-
CV Unit and change the
play mode
Play mode choice
Midi Chan.
Lowest midi note
Quad Unit
responds to
4 Digital to
analogue
converters (DAC's)
corresponding to
CV1-CV4 *
* Note the labelling of the 4 DAC's is DAC0-DAC3 (as opposed to DAC1-DAC4 ) in the
configuration program.
You just have to remember that DAC0-DAC3 correspond to CV1-CV4 as used in this guide.
Similarly you will notice that Gate1-Gate4 are labelled as 'Gate0-Gate3' in the program.
In the above example, if the send to flash button is clicked the Quad Unit would be set to Poly2
play mode. This means CV1 corresponds to Midi note 1 and gate G1 is triggered by Midi note 1
on message; CV2 corresponds to Midi note 2 and Gate 2 is triggered when Midi note 2 on
'write to Flash' button.
click to save the chosen play
mode into the flash memory
of the Quad Midi -CV
'PB'=pitch bend
'VL'=Note Velocity
'presets' where you can
save your favourite play
modes settings for quick
change
limits maximum
CV to +5V