Digitana VCS3 MKII Quad Midi-CV Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación Digitana VCS3 MKII Quad Midi-CV. Digitana VCS3 MKII Quad Midi-CV 13 páginas.

Imprimir página

The "MIDI learn" switch

To place the unit in midi learn mode toggle the midi learn switch on then off (down and back

up). The midi activity led stays on until a MIDI message has been received and learned by the

interface. The led will blink 3 long blinks if the interface receives the "Write To Flash" sysex

message and will then automatically go out of midi learn mode to midi play mode.

If you wish to come out of midi learn mode without sending any new configuration data just

toggle the midi learn switch down and up once more. Then the led will switch off and the

unit is in the standard play mode.

NB: the normal position for the midi learn toggle switch is in the 'up' position.

Here is how Midi learn works:

When you toggle the Midi Learn switch down then back up the midi activity led stays on

and the MCV876 is in Learn Mode waiting to receive a Midi message containing Midi

channel information. When a message arrives ( you play a note on the master keyboard for

example) , the Midi channel number is extracted, compared to the actual interface Midi

channel and set to this new value if different. If the Midi channel of the message is identical

to the one configured into the interface, and if the message received is a Midi note ON

message, the interface extracts the Midi number of the note played and sets this value as

the reference (base or lowest ) note. This allows transpose of the MCV876 to any note on

the keyboard. The reference note is the Lowest note the interface can play ( digital zero).

Using the small Windows configuration programme available from Marc's website you can

configure the unit to any of the available play modes mode as you desire.

V3.06 Firmware and different Play Modes

The Quad Midi-CV unit can be configured in these different playmodes using the windows

configuration programme (version 3) which is available from

http://m.bareille.free.fr/mcv876/mcv876.html

CV1-Gate1 assigned to Note On/Off messages

•

CV2, CV3,CV4* are assignable to controllers, velocity or PitchBend..

•

Gates 2,3,4 are assignable to controllers.

Mono

•

One channel recognition

•

CV1/Gate1 and CV2/Gate2 are on channel N - CV1 assignable to MIDI notes

•

CV3/Gate3 and CV/Gate4 are on channel N+1 - CV4* assignable to MIDI notes

Multi2

•

CV1 to CV4*and Gate1 to 4 are respectively on channels N to N+4

•

CVs or gates can be assigned to MIDI notes or controllers independently.

Multi4

•

CV1 +Gate1 and CV2+Gate2 are assigned to Note On/Off messages

•

CV3 and CV4* are assignable to controllers, velocity or PitchBend..

•

Poly2

CV1 to CV4* and Gate1 to 4 are assigned to Note On/Off message

•

Poly4

*note CV4 is only available on the Quad Midi-CV units.