CabKing 8V1 Manual de instrucciones - Página 18

Navegue en línea o descargue pdf Manual de instrucciones para Torno CabKing 8V1. CabKing 8V1 20 páginas.

PROBLEM

PARTS ARE MISSING OR DAMAGED

MOTOR IS HOT

MOTOR MAKES A RATTLING SOUND

MOTOR VIBRATES OR SHAKES

WATER CONTROL KNOBS

KEEP SPINNING

WHEELS DON'T TURN

WATER FLOW IS WEAK OR

DOESN'T FLOW AT ALL

DRIP PANS DO NOT DRAIN

NOZZLE / WATER SYSTEM PARTS

ARE LOOSE OR FALL OFF

TROUBLESHOOTING

RECOMMENDED SOLUTION

THIS IS NORMAL. BY DESIGN, THE MOTOR IS TOTALLY ENCLOSED AND

NON-VENTILATED SO IT PRODUCES HIGH TEMPERATURES. THE

TEMPERATURE RANGE IS 190°F - 220°F. AVOID CONTACT WITH THE

HOUSING.

THIS NOISE CAN BE COMMON AND WILL EVENTUALLY WORK ITSELF

OUT WITH PROLONGED MACHINE USAGE. IT IS NOT A SERIOUS

PROBLEM UNLESS THERE IS A VIBRATION ASSOCIATED WITH IT.

MAKE SURE THE WHEELS ARE PROPERLY BALANCED. THIS CAN BE

FIXED BY TAKING THE WHEELS OFF OF THE SHAFT AND REALIGNING

THEM. MAKE SURE THE SHAFTS ARE TIGHTENED.

TIGHTEN THE SET SCREW LOCATED INSIDE THE KNOBS USING A FLAT

HEAD SCREWDRIVER.

MAKE SURE POWER IS CONNECTED AND MACHINE IS TURNED ON.

MAKE SURE THE WHEELS ARE NOT OBSTRUCTED. IF THE WHEELS ARE

CAUGHT ON SOMETHING BEFORE YOU TURN ON THE MOTOR, THERE

WILL NOT BE ENOUGH MOMENTUM TO START SPINNING.

MAKE SURE THERE IS ENOUGH WATER IN THE BUCKET WITH THE

WATER PUMP.

MAKE SURE THE WATER PUMP IS CONNECTED TO A POWER SUPPLY.

MAKE SURE ALL WATER TUBES ARE CONNECTED PROPERLY.

CLEAN NOZZLES AND Y-SPLITS WITH THE INCLUDED PIPE CLEANER.

SHAKE THE DRIP PAN TUBES TO START THE FLOW WHILE TILTING THE

DRIP PANS UPWARDS.

MAKE SURE THE DRIP PAN TUBES ARE ANGLED DOWNWARDS. TUBES

SHOULD ALSO BE CUT TO LENGTH AFTER SETTING UP THE UNIT.

CLEAN THE DRIP PAN OUTSPOUT.

WE SUGGEST USING TEFLON TAPE AND WRAPPING THE PORTION OF

THE NOZZLE THAT IS INSERTED INTO THE Y-SPLIT WITH ENOUGH TAPE

TO SECURE THE FIT.