Argo ASIBS9DC Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Aire acondicionado Argo ASIBS9DC. Argo ASIBS9DC 17 páginas.

Imprimir página

CARE AND CLEANING

WARNING

Maintenance operations must be carried out by specially

trained personnel.

For safety, be sure to turn the air conditioner of f and also

to disconnect the power before cleaning.

Do not pour water on the indoor unit to clean it. This will

damage the internal components and cause an electric

shock hazard.

CASING AND GRILLE (INDOOR UNIT)

Clean the casing and grille of the indoor unit with a vacuum

cleaner brush, or wipe them with a clean, soft cloth.

If these parts are stained, use a clean cloth moistened with

a mild liquid detergent.

When cleaning the grille, be careful not to force the vanes

out of place.

CAUTION

Never use solvents, or harsh chemicals when cleaning the

indoor unit. Do not wipe the plastic casing using very hot

water.

Some metal edges and the vanes are sharp and may

cause injury if handled improperly; be especially careful

when you clean these parts.

The internal coil and other components of the outdoor

unit must be cleaned every year. Consult your dealer or

service centre.

HOW TO REMOVE THE AIR INTAKE GRILLE

The air intake grille can be removed in order to wash it with

water.

GRILLE

Detach the safety string from the frame (remember to

attach it again after cleaning or maintenance).

Open the air intake grille , hold it on and pull it toward

you to detach the two guides.

Washing the grille with water

Clean the grille gently using a soft sponge, or the like.

Then wipe away any remaining moisture.

Neutral detergent may be used to remove stubborn

dirt. Then rinse thoroughly with water and wipe away

any remaining moisture.

STRING

AIR FILTER

The air filter should be cleaned at least once every six

months or more frequently; it depends on the real operation

conditions.

HOW TO REMOVE THE FILTER

L AT C H

SCREW

AIR INTAKE GRILLE

1.Remove the screw on each side out of the latch using a

screwdriver.

2.Press on the two latches of the air intake grille with your

thumbs in the direction of the arrow to open the grille.

3.Open the air intake grille downward.

4.Remove the air filter from the air intake grille. Clean the

air filter.

5.Insert the filter correctly again inside the grille, close the

grille letting the latches slide toward the outside and fix

again the latch with the screw on both sides.

FILTER CLEANING

Use a vacuum cleaner to remove light dust. If there is

sticky dust on the filter, wash the filter in lukewarm, soapy

water, rinse it in clean water, and dry it.

AIR FILTER