Cisco EX90 Manual del usuario - Página 41

Navegue en línea o descargue pdf Manual del usuario para Sistema de conferencias Cisco EX90. Cisco EX90 45 páginas. Telepresence system
También para Cisco EX90: Manual del usuario (50 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (37 páginas), Manual del usuario (49 páginas), Manual de consulta rápida (2 páginas), Manual de introducción (42 páginas), Manual de instalación (6 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (7 páginas), Manual de solución de problemas (37 páginas), Manual de instalación (2 páginas), Manual del usuario (45 páginas), Manual del usuario (37 páginas), Manual de introducción (46 páginas)

Cisco EX90 Manual del usuario
Cisco TelePresence System EX90
Contents
Introduction
Administrator Settings—EMC Resilience Mode
If the Touch controller is used in environments with
considerable amounts of electromagnetic noise
present, you may experience an appearance of false
signals—as if someone tapped the Touch controller
when nobody obviously did so.
To cope with this you may set the EMC Resilience
Mode to On. You must then press and hold for a little
while, rather than just tap, in order to make the system
aware of your tapping. This will avoid the appearance
of false signals.
As long as the system is used in environments without
consideable amounts of electromagnetic noise, the
setting should be set to Off (as shown).
D14724.06
User guide EX90, TC4.2, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Using the EX90
The settings
The settings
41
User guide
Web interface
Contact us
www.cisco.com