Cisco MCS 7800 Series Manual del usuario final - Página 4

Navegue en línea o descargue pdf Manual del usuario final para Sistema de conferencias Cisco MCS 7800 Series. Cisco MCS 7800 Series 6 páginas. Multiplatform phones
También para Cisco MCS 7800 Series: Manual de inicio rápido (12 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Referencia rápida (2 páginas), Manual maestro de migración de firmware (31 páginas), Manual de inicio rápido (2 páginas), Manual (43 páginas), Manual (4 páginas), Comenzar (6 páginas), Manual de instalación (39 páginas), Manual (20 páginas), Manual de inicio rápido (2 páginas)

Imprimir página
Cisco MCS 7800 Series Manual del usuario final
Tasks on Phone Device (Continued)
Place an Intercom call
1. Dial the lead digit and the extension you want to
intercom with.
Contact your network administrator to know the lead
digit configured for intercom calls in your network.
2. Speak out the message.
The message is played in speaker mode on the dialed
extension.
3. To answer an intercom call, press the line key.
A dedicated two-way audio call is established
Answer a Pickup Group Call
Same Pickup Group
An incoming call can be answered on any of the
extensions belonging to the same pickup group in the
following ways:
x Press Pickup Softkey
or
x Press GPickup softkey followed by *
Different Pickup Group
An incoming call can be answered by any extension
belonging to different pickup groups by pressing GPickup
softkey followed by the pickup group number.
Copyright © 2018 Cisco Systems, Inc. All rights reserved.
Cisco Business Edition 4000 End User Guide
Log in to All Hunt Groups as a Static
Member
1. Press More (...).
2. Press HLog softkey. The phone logs in to all the Hunt
Groups in which you are a permamnet member.
3. Press HLog again to log out of all Hunt Groups.
: You cannot log in or log out of individual Hunt
NOTE
Groups.
Log in to a Hunt Group as a Dynamic
Member
1. Press Applications
2. Select My Phone Apps > Voice Hunt Groups.
3. Scroll through the list of Hunt Groups and select the
required Hunt Group.
4. Press Join.
5. Press Unjoin to log out of the Hunt Group.
Swap an Active Call from Desk Phone to
Mobile Phone
To swap a call from desk phone to mobile phone
NOTE:
and conversely, you must have SNR configured on your
extension.
From a call connected on the desk phone, press More (...)
and then press Mobility softkey. The call gets moved to
the mobile phone.
Press Mobility softkey on the desk phone again to swap
the call from mobile phone to desk phone.
.
April 2018