Cisco MCU 5300 series Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Sistema de conferencias Cisco MCU 5300 series. Cisco MCU 5300 series 14 páginas. Telepresence

Imprimir página

Configuring the MCU 53x0

For example, to assign an address of 192.168.1.2 where the default gateway is at 192.168.1.1, enter:

static A 192.168.1.2 255.255.255.0 192.168.1.1

To manually specify a DNS server, use this command:

dns <DNS server address> [<secondary DNS server>][<domain>]

To revert to using DHCP after setting a static IPv4 address, use the following command:

dhcp -4 A

For information on assigning a static IPv6 address type help static. For information on assigning an

automatic IPv6 address type help dhcp or else see the online help.

Task 6: Discover the IP address of the MCU 53x0

1. To display the current status of the IP address, enter: status

If you have DHCP enabled on your network and you are allowing the MCU 53x0 to acquire its address

using DHCP, the IP address that has been acquired by Ethernet Port A will be shown; if you have

assigned a static IP address, that is the address that will be shown.

2. Make a note of the IP address. You will use this to access the web interface of the unit.

Note: When your MCU 53x0 has an IP address, you can add an entry for it on your DNS server and use a

hostname to access the device's web interface.

Task 7: Log in to the MCU 53x0

To log in to the web interface of the device:

1. Use your browser to navigate to the IP address or hostname of the unit.

2. Enter the user name admin with no password, and click Log in.

The

Home

page is displayed.

Note: We recommend that you change the admin account to use a password as soon as possible. To do

that, go to

Home

and click Change password.

Cisco TelePresence MCU 5300 Series Installation Guide

Page 7 of 14