Cisco MX Series Manual de introducción - Página 16
Navegue en línea o descargue pdf Manual de introducción para Sistema de conferencias Cisco MX Series. Cisco MX Series 42 páginas. Telepresence video systems
También para Cisco MX Series: Manual de introducción (41 páginas), Manual de introducción (33 páginas), Manual de introducción (34 páginas), Manual de introducción (46 páginas)
Imprimir página
Cisco TelePresence Video Systems
Contents
Setting date, time and location
(when not set by a provisioning system)
You should check that the date and time settings are correct
when you set up your video conference system. the system
uses this information for example to time stamp messages
transmitted to gatekeepers and other network elements.
You can find the time in the top right corner of the touch
controller display.
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction
User interfaces
1. tap
Settings > Date, Time &
2. tap
24h
or
3. tap dd.mm.yy,
Format
you prefer.
4. Select the
list of available zones by tapping the - or + signs.
5. Set
Date & Time Mode
to be regularly updated; otherwise, select Manual.
if you select Manual, enter the correct value for Hour, Minute,
Year, Month, and Day. tap the plus and minus signs to
increase or decrease a value.
if you select Auto, the NtP server address can be automati-
cally obtained from the network (set the
Auto) or you can enter the
(set
NTP Mode
6. tap
Save
saving.
7. tap
Exit
to return to the home menu.
Confirguration
Configuration
Location.
12h
to select the
Time Format
you prefer.
mm.dd.yy
or
yy.mm.dd
to select the
Time Zone
your system is in. Step through the
to
Auto
if you want time and date
NTP Mode
NTP Server
address yourself
to Manual).
to save the changes, or
Undo
to leave without
16
Appendices
Date
to
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts