Sony BKM-FW50 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para TV Sony BKM-FW50. Sony BKM-FW50 35 páginas. Streaming receiver adaptor
También para Sony BKM-FW50: Folleto y especificaciones (12 páginas), Manual de instrucciones (28 páginas), Especificaciones (2 páginas), Especificaciones (12 páginas), Folleto (4 páginas), Manual de instrucciones (18 páginas)

Installation

Before installation

• Turn off power to the display and all

other equipment connected to the display.

For the display, proceed as follows: press

1 to put the display into standby mode

and then disconnect the power cord from

the AC outlet.

• While carrying out the installation, the

display must be firmly secured.

Install the BKM-FW50 inside the display

as follows.

If an optional adaptor is installed,

loosen its fastening screws (top and

bottom) by turning counterclockwise

with a flatblade screwdriver and then

carefully pull out the adaptor from

the display.

When option slot is at

left of display *

* The location of the option slot differs

according to the model. On models with

multiple option slots, use a slot that

supports video/communication functions

(VIDEO/COM port). Consult the

documentation of the FWD series product

for more information.

Installation

Insert the BKM-FW50 into the

display with correct orientation.

Make sure that the adaptor is firmly

seated in the internal connector of the

display. Then tighten the fastening

screws (top and bottom) with a flatblade

screwdriver and perform the necessary

connections.

Caution

Do not touch the connector section

Never touch the connector section inside

the display. Otherwise there is a risk of

accidents or damage.