Sony Bravia KD-43X8000H Manual de referencia - Página 5

Navegue en línea o descargue pdf Manual de referencia para TV Sony Bravia KD-43X8000H. Sony Bravia KD-43X8000H 16 páginas.
También para Sony Bravia KD-43X8000H: Manual de referencia (2 páginas)

Imprimir página

Sony Bravia KD-43X8000H Manual de referencia

• Be sure to use the screws supplied with the

Wall-Mount Bracket when attaching the

Wall-Mount Bracket to the TV set. The

supplied screws are designed as indicated by

illustration when measured from the attaching

surface of the Wall-Mount Bracket.

The diameter and length of the screws differ

depending on the Wall-Mount Bracket model.

Use of screws other than those supplied may

result in internal damage to the TV set or

cause it to fall, etc.

KD-75X8000H / 65X8000H / 55X8000H

10 mm - 12 mm

Screw (M6)

Wall-Mount Bracket

KD-49X8000H / 43X8000H

8 mm - 12 mm

Screw (M6)

Wall-Mount Bracket

TV's rear cover

• Be sure to store the unused screws and

Table-Top Stand in a safe place until you are

ready to attach the Table-Top Stand. Keep the

screws away from small children.

* Only on limited region/country/TV model.

Note

• Place the TV with its screen facing down on a level

and stable surface covered with a thick and soft cloth

when removing the Table-Top Stand from the TV to

prevent damaging the surface of the LCD display.

(KD-49X8000H / 43X8000H)

KD-75X8000H / 65X8000H / 55X8000H

Remove the screws from the rear of the

TV.

Attach the Wall-Mount Attachment

(supplied with the TV) to the rear of the

TV (to make it parallel with the wall).

Note

• If using an electric screwdriver, set the torque at

approximately 1.5 N·m {15 kgf·cm}.

• Be sure to fasten the Wall-Mount Attachment when

attaching them to the TV.

Use only a flat head screwdriver to install the

Wall-Mount Attachment. Use of another tool might

result in over torqueing the Wall-Mount Attachment

and damaging the TV.

1.5 N·m

{15 kgf·cm}