Cisco Quick Set C20 Manual de introducción - Página 35

Navegue en línea o descargue pdf Manual de introducción para Sistema de conferencias Cisco Quick Set C20. Cisco Quick Set C20 42 páginas. Tc7.3, english, december 2015
También para Cisco Quick Set C20: Manual de introducción (41 páginas), Manual del usuario (44 páginas), Manual de introducción (42 páginas), Manual de introducción (35 páginas), Manual de consulta rápida (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (25 páginas), Manual de solución de problemas (37 páginas), Hoja de instalación (2 páginas), Manual de consulta rápida (2 páginas), Manual de consulta rápida (2 páginas), Manual de introducción (32 páginas), Manual del usuario (48 páginas), Manual de introducción (46 páginas)

Imprimir página

Cisco Quick Set C20 Manual de introducción

Cisco TelePresence Video Systems

Contents

Call key

Press the Call key to place a

call, and to accept an incom-

ing call.

use the Call button as a short-

cut to recent Calls when the

Call menu is not visible.

Clear

Press the Clear key to remove

characters in a text field.

Waking up the system

to wake up the system just

pick up the remote control or

press any key. You may have

to point the remote control

towards the system/camera

to make sure it discovers you.

Home key

Press the

HoMe

(

)

key

to open the Home menu

on screen.

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

end call / Standby

Press the end Call key to

reject an incoming call, to

end an ongoing call or—

when idle—to go into standby

mode. When navigating in

the menu the key is used to

exit the menu system.

Press and hold this key

to have the system enter

standby mode.

Rubber line sensors

When you pick up the

remote control and touch the

rubber line sensors along the

sides of the remote control,

the system wakes up.

Configuration

Alphanumeric keypad

the keypad behaves in a

similar way to the keypad on

a mobile phone.

0-9, a-z, period (.), @,

space, *

Press a key repeatedly to

toggle between the options

displayed on that key.

IR sensor range (DIP switch setting)

the ir sensor has a short and long range. When video conference systems are placed close to each

other, you may find it convenient to use the short range to avoid interfering with the other systems.

open the battery cover and remove the batteries to set the diP switch.

• Short range (1 m / 3 ft): Move the diP switch down.

• long range: Move the diP switch up.

The DIP switch

Getting Started Guide

Appendicies

Appendices

Contacts

Press and hold the #

key to toggle between

lower and upper case

characters and numbers

(depending on context).

abc/123 #