Cisco SX series Manual de introducción - Página 29
Navegue en línea o descargue pdf Manual de introducción para Sistema de conferencias Cisco SX series. Cisco SX series 33 páginas. Telepresence video systems
También para Cisco SX series: Manual de introducción (34 páginas), Manual de introducción (46 páginas)
Cisco TelePresence Video Systems
Introduction
Date, time and location
(When not set by a provisioning system)
We recommend you check that the date and time settings
are correct when you set up your video conference system.
The system uses this information for example to time stamp
messages transmitted to gatekeepers and other network
elements.
You can find the time in the top right corner of the Touch
controller display.
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.
User interfaces
Web interface
1. Tap the user name in the upper left corner and tap
Settings > Administrator > Date, Time &
2. Tap
24h
3. Tap dd.mm.yy,
Format
4. Select the
your system. Step through the list of available zones by
tapping
5. Set
Date & Time Mode
to be automatically updated; otherwise, select Manual.
a. If you select Manual, enter the correct value for
Hour, Minute, Year, Month, and Day. Tap
decrease or increase a value.
b. If you select Auto, the NTP server address can be
automatically obtained from the network (set the
NTP Mode
address yourself (set
6. Tap
Save
without saving.
7. Tap
Exit
On-screen setup assistant
Location.
or
12h
to select the
Time Format
you prefer.
mm.dd.yy
or
yy.mm.dd
to select the
you prefer.
Time Zone Area
and
Time Zone Location
-
or
+
.
to
Auto
if you want time and date
-
and
to Auto) or you can enter the
NTP Server
NTP Mode
to Manual).
to confirm the changes, or
Undo
to leave
to return to the home menu.
29
Touch
Touch
Date
for
+
to
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Appendices