Cisco TelePresence DX80 Manual de instalación - Página 3

Navegue en línea o descargue pdf Manual de instalación para Sistema de conferencias Cisco TelePresence DX80. Cisco TelePresence DX80 6 páginas. Touchscreen mbtelehealth a shared health service
También para Cisco TelePresence DX80: Manual del usuario (48 páginas), Manual del usuario (48 páginas), Manual del usuario (33 páginas), Manual del usuario (40 páginas), Manual del usuario (14 páginas), Manual del usuario (40 páginas), Manual (43 páginas), Puesta en marcha (2 páginas), Manual de consulta rápida (3 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (8 páginas)

Connect Cables

1. Place the DX80 face down on a flat surface to connect the cables. Do not exert force

on the camera as this may damage it.

2. Flip the connector cover up to access the connector panel and lead the cables under

the strain relief bar.

3. Connect the Ethernet cable (A) between the network connector

wall socket.

4. Connect the provided power adapter and cable (B) between the DX80

power socket.

5. Pull the foot stand, set the DX80 in an upright position and adjust the angle. The foot

stand is stiff to open at first.

To use the same network wall socket for both your computer and DX80, connect your

computer to the computer network port on the DX80, and the DX80 to the network wall

socket (see step 3).

Factory

reset

pinhole

Power

USB

Type B

Service port

HDMI out

Micro-SD

(not in use)

HDMI in

USB

slot

and a network

and a

Computer

Kensington

network

lock

Network