Cisco TelePresence IX5200 Configuración inicial - Página 11
Navegue en línea o descargue pdf Configuración inicial para Sistema de conferencias Cisco TelePresence IX5200. Cisco TelePresence IX5200 40 páginas.
También para Cisco TelePresence IX5200: Manual de inicio rápido (15 páginas), Manual del usuario (26 páginas), Manual de instalación (36 páginas)
Imprimir página
To set the address using the IX5000 administration GUI:
a.
b.
c.
d.
e.
f.
Your system saves the changes and restarts.
CLI Example
The following example gives the Cisco TelePresence system an IP address of 10.0.0.2, a subnet of
255.255.255.0, a gateway of 10.0.0.1, a DNS server of 172.16.1.5, and a domain name of Cisco.com:
admin:set network IP static 10.0.0.2 255.255.255.0 10.0.0.1 172.16.1.5 cisco.com
ip address successfully set
system restarting...
Requirements for Auxiliary Displays
•
•
Qualified Cisco Auxiliary Displays
The following displays are qualified for use with Cisco TelePresence System running IX software:
•
•
Note
Before use, turn off all on-screen display (OSD) capability for the displays. This prevents the display
from showing messages after you stop sharing a presentation. To turn off OSD, complete the following
steps using the remote control that comes with the system, or use the joystick control on the back of the
display:
Step 1
Turn the display on.
OL-27038-01
Using a supported web browser, log in to the Cisco TelePresence system GUI by entering the IP
address 169.254.1.1.
Enter the username and password when you are prompted to do so. By default, the username is
admin and the password is cisco.
Click Configuration.
In the DHCP area, click Static.
Enter a static IP address, subnet mask, IP gateway, DNS server(s), and the network domain name.
Click Apply.
Qualified Cisco Auxiliary Displays, page 11
Reboot Required After First-Time Setup For Systems with Auxiliary Displays, page 12
42-inch display, part number CTS-5K-DISP42 (Spare is CTS-5K-DISP42=
The release notes previously reported that the 42-inch display, part number CTS-MON-42-WW is a
qualified Cisco display. This part number is not a qualified Cisco display for the IX system.
55-inch display, part number CTS-MON-55-WW
HDMI-to-HDMI cables are not supported for display connections to the IX codec. You must use
the HDMI-to-DVI connector for the displays (DVI on the display side). Some versions of the
55-inch display do not include a DVI input; use the included HDMI-to-DVI adapter to connect
cables to the HDMI input on the display.
Requirements for Auxiliary Displays
Cisco TelePresence IX5000 and IX5200 First-Time Setup
)
11