Cisco TelePresence SX10 Manual - Página 43

Navegue en línea o descargue pdf Manual para Sistema de conferencias Cisco TelePresence SX10. Cisco TelePresence SX10 45 páginas. In-room control on touch 10
También para Cisco TelePresence SX10: Manual de instalación (8 páginas), Manual del usuario (26 páginas), Manual rápido (2 páginas), Manual del usuario (34 páginas), Manual del usuario (29 páginas), Manual de usuario preliminar (9 páginas), Manual del usuario (38 páginas), Manual de instalación (8 páginas), Manual del usuario (2 páginas), Manual del usuario (37 páginas), Manual (45 páginas), Manual de instalación (2 páginas), Manual del usuario (34 páginas), Manual del usuario (5 páginas), Manual del usuario (38 páginas), Manual del usuario (38 páginas), Manual de introducción (46 páginas), Manual rápido (2 páginas)

Imprimir página
Cisco TelePresence SX10 Manual
Control of blinds
Table of contents
You can either use a spinner, or up and down arrows from the Icons
tab in the widget library.
Introduction
Create a user interface
API for in-room control
Widgets
Command reference
Troubleshooting
Tips and tricks
Consider the following strategy:
• Tilt the slides as response to a short press on a direction arrow. If
Examples
Examples
• As response to a long press on a direction arrow, start moving
• Short press any button in order to stop the movement after a long
In-Room Control on Touch 10
for Cisco TelePresence
MX200 G2, MX300 G2,
MX700, MX800,
SX10, SX20, SX80
Collaboration Endpoint
software version CE8.2
D15358.02 - JULY 2016
www.cisco.com
© 2016 Cisco Systems, Inc.
All rights reserved.
tilted all the way, move the blinds up or down incrementally.
the blinds in that direction. They do not stop until all the way up or
down.
press. Then no separate stop button is necessary.
Use a button only to send a signal
A button can be used just to send a signal, without changing the
button's state or visual appearance.
As an example, use the All lights on button to switch on all lights. Do
not change the button's color from gray to blue, but update the other
light controls to reflect the true status of the room.
A button that does not change color
(from gray to blue) when used
43